R-3 zone in Ladysmith: Medium Density Residential
Accommodate multiple-unit developments.
Zone rules
| Purpose | Accommodate multiple-unit developments. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 2,023 square metres |
| Minimum lot width | 18.28 metres (frontage) |
| Maximum lot coverage | 50.0 percent (not counting buildings used only for off-street parking); 60.0 percent where all required parking is underground |
| Maximum density | Floor Space Ratio 2.0; 60 units per hectare |
| Maximum height | 12.0 metres to the highest point of the roof |
| Maximum height, accessory buildings | 5.0 metres |
| Front setback | 6.0 metres |
| Rear setback | 4.5 metres |
| Interior side setback | 4.5 metres |
| Street side setback | 4.5 metres |
| Accessory building setbacks | front 6.0 metres; side (interior or exterior) 1.0 metre for up to 10.0 m² and 1.5 metres for over 10.0 m²; rear 1.0 metre for up to 10.0 m² and 1.5 metres for over 10.0 m² |
| Other rules | A parcel may contain more than one principal building |
Source: Town of Ladysmith Zoning Bylaw 2014, No. 1860, Schedule A - Zoning Bylaw Text (consolidated September 29, 2026), s. 10.7 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the consolidation is not a legal document and certified copies of the original bylaws should be consulted. R-2-D2 (10.6) is reserved for future use and has no zone text. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Ladysmith zones · Report an error