I1 zone in Lake Country: General Industrial
Provide for general industrial uses.
Zone rules
| Purpose | Provide for general industrial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1.0 ha, or 4000 m² if connected to the community sanitary sewer system |
| Minimum lot width | 40.0 m |
| Maximum lot coverage | 60% |
| Maximum density | Floor area ratio 1.5 |
| Maximum height | 14.0 m |
| Front setback | 7.5 m |
| Rear setback | 0.0 m where adjacent to commercial or industrial zones; 6.0m abutting other zones |
| Interior side setback | 4.5 m (not required abutting a lot in the C or I zones) |
| Street side setback | 6.0 m on a flanking street |
| Other rules |
|
Source: Zoning Bylaw 561, 2007 (consolidated 2026-08-18; cover page says it includes amendments as of June 2, 2026), s. 17.1 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. A consolidated copy to be used for convenience only; users are asked to refer to the Zoning Bylaw as amended from time to time to verify accuracy and completeness. The bylaw's own zone table also lists DC6 (Direct Control 6), but that section is marked deleted by Bylaw 719 and is not listed below. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Lake Country zones · Report an error