I6 zone in Lake Country: Heavy Industrial
Designate and preserve land for industrial uses that, due to appearance, noise, odour, toxic emissions or fire or explosive hazards, may harm other zones.
Zone rules
| Purpose | Designate and preserve land for industrial uses that, due to appearance, noise, odour, toxic emissions or fire or explosive hazards, may harm other zones. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1.0 ha, or 8000 m² if connected to the community sanitary sewer system |
| Minimum lot width | 40.0 m |
| Maximum density | Floor area ratio 0.75 |
| Maximum height | 18.0 m (26.0 m for accessory buildings and structures) |
| Maximum height, accessory buildings | 26.0 m |
| Front setback | 10.0 m |
| Rear setback | 7.5 m |
| Interior side setback | 7.5 m |
| Other rules |
|
Source: Zoning Bylaw 561, 2007 (consolidated 2026-08-18; cover page says it includes amendments as of June 2, 2026), s. 17.6 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. A consolidated copy to be used for convenience only; users are asked to refer to the Zoning Bylaw as amended from time to time to verify accuracy and completeness. The bylaw's own zone table also lists DC6 (Direct Control 6), but that section is marked deleted by Bylaw 719 and is not listed below. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Lake Country zones · Report an error