RM4 zone in Lake Country: Low Density Multiple Housing
A zone primarily for low rise, low density apartment housing with urban services as a transition between low and medium density development.
Zone rules
| Purpose | A zone primarily for low rise, low density apartment housing with urban services as a transition between low and medium density development. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 900 m² |
| Minimum lot width | 30.0 m |
| Maximum lot coverage | 45%, provided buildings, driveways and parking areas together are not more than 60% |
| Maximum density | Floor area ratio 0.65 (0.75 with a housing agreement) |
| Maximum height | Lesser of 12.4 m or 3 storeys |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 6.0 m |
| Rear setback | 7.5 m (1.5 m for accessory buildings) |
| Interior side setback | 2.3 m for a building not over 2 storeys or an accessory building; 4.5 m for any part of a building over 2 storeys |
| Street side setback | 4.5 m from a flanking street |
| Accessory building setbacks | rear 1.5 m; accessory buildings with recreational amenities for all residents follow the principal building setbacks |
| Other rules |
|
Source: Zoning Bylaw 561, 2007 (consolidated 2026-08-18; cover page says it includes amendments as of June 2, 2026), s. 15.7 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. A consolidated copy to be used for convenience only; users are asked to refer to the Zoning Bylaw as amended from time to time to verify accuracy and completeness. The bylaw's own zone table also lists DC6 (Direct Control 6), but that section is marked deleted by Bylaw 719 and is not listed below. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Lake Country zones · Report an error