M-2 zone in Salmon Arm: Light Industrial Zone
Light manufacturing and related uses in areas where conflict with surrounding uses is unlikely.
Zone rules
| Purpose | Light manufacturing and related uses in areas where conflict with surrounding uses is unlikely. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 465.0 m² |
| Minimum lot width | 15.0 m |
| Maximum lot coverage | 70% of parcel or site area |
| Maximum height | 15.0 m (principal and accessory buildings) |
| Maximum height, accessory buildings | 15.0 m (principal and accessory buildings) |
| Front setback | 6.0 m |
| Rear setback | 6.0 m next to a parcel not zoned Industrial; 3.0 m in all other cases |
| Interior side setback | 6.0 m next to a parcel not zoned Industrial; 1.5 m where the parcel has access to a lane; 4.0 m where it does not |
| Street side setback | 6.0 m |
| Accessory building setbacks | Same as principal buildings: front 6.0 m, rear 6.0 m or 3.0 m, interior side 6.0 m, 1.5 m or 4.0 m, exterior side 6.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 2303 (Schedule "A" consolidation, effective December 18, 1995, updated August 2026), s. 29 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Schedule "B" (the zoning maps, Maps 1 to 13) is at the end of the same PDF as images with no text layer; sections 13 and 37 are blank placeholders and CD-5 and CD-10 are listed as "Pending" in Table 1. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Salmon Arm zones · Report an error