M-6 zone in Salmon Arm: Industrial Holding Zone
Phased industrial zoning on rural residential lots designated in the Official Community Plan.
Zone rules
| Purpose | Phased industrial zoning on rural residential lots designated in the Official Community Plan. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 0.4 hectare |
| Minimum lot width | 18.0 m |
| Maximum density | One single family dwelling per parcel; a second dwelling may be permitted under Section 4.13 |
| Maximum height | 10.0 m (single family dwelling) |
| Maximum height, accessory buildings | 12.0 m |
| Front setback | 6.0 m for non-agricultural buildings; 30.0 m for buildings intended for agricultural uses |
| Rear setback | 6.0 m for non-agricultural buildings; 15.0 m for agricultural buildings |
| Interior side setback | 3.0 m for non-agricultural buildings; 15.0 m for agricultural buildings |
| Street side setback | 6.0 m for non-agricultural buildings; 30.0 m for agricultural buildings |
| Accessory building setbacks | Principal and accessory buildings for non-agricultural uses: front 6.0 m, rear 6.0 m, interior side 3.0 m, exterior side 6.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 2303 (Schedule "A" consolidation, effective December 18, 1995, updated August 2026), s. 33 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Schedule "B" (the zoning maps, Maps 1 to 13) is at the end of the same PDF as images with no text layer; sections 13 and 37 are blank placeholders and CD-5 and CD-10 are listed as "Pending" in Table 1. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Salmon Arm zones · Report an error