RM-1 zone in Sun Peaks: Residential Multiple One
In short
The development of cluster single family and townhouse dwellings.
Zone rules
| Purpose | The development of cluster single family and townhouse dwellings. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Auxiliary buildings and auxiliary uses |
| Minimum lot area | Per dwelling unit: single family dwelling 420 m² (usable parcel area 280 m²); two family dwelling or townhouse 300 m² (usable parcel area 200 m²) |
| Minimum lot width | 1/10th of the parcel perimeter |
| Maximum lot coverage | 35 percent |
| Maximum density | Floor space ratio 0.25 |
| Maximum height | 10.7 metres (townhouse building) |
| Front setback | 6 m (fee simple and bare land strata lots) |
| Rear setback | 6 m, or 3 m where the rear lot abuts a golf course (fee simple and bare land strata lots) |
| Interior side setback | 3 m (fee simple and bare land strata lots) |
| Other rules |
|
Source: Sun Peaks Resort Area Zoning Bylaw No. 1400 (consolidated, revised May 7, 2025), s. 16 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The municipality's consolidation is for convenience only; it says to check with the municipality for current information. Section numbers below are the bylaw's Division numbers. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Sun Peaks zones · Report an error