RT-1 zone in Sun Peaks: Residential Two-Family One
In short
A low density area for single and two family dwellings.
Zone rules
| Purpose | A low density area for single and two family dwellings. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | Single family dwelling 700 m² (usable parcel area 465 m²); two family dwelling 820 m² (usable parcel area 750 m²) |
| Minimum lot width | 1/10th of the parcel perimeter |
| Maximum lot coverage | 35 percent |
| Maximum density | Single family dwelling: 325 m² or floor space ratio 0.35, whichever is lower. Two family dwelling: 375 m² or floor space ratio 0.45, whichever is lower. Parking use: 56 m² (single family), 40 m² per dwelling unit (two family) |
| Maximum height | 7.6 metres |
| Front setback | 6 m |
| Rear setback | 6 m |
| Interior side setback | 3 m |
| Other rules |
|
Source: Sun Peaks Resort Area Zoning Bylaw No. 1400 (consolidated, revised May 7, 2025), s. 15 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The municipality's consolidation is for convenience only; it says to check with the municipality for current information. Section numbers below are the bylaw's Division numbers. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Sun Peaks zones · Report an error