RT1 zone in Whistler: Two Family Residential One
Provide a low density area for detached and duplex residential dwellings.
Zone rules
| Purpose | Provide a low density area for detached and duplex residential dwellings. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | Detached dwelling: 695 square metres (floor area 325 square metres or less), 928.6 square metres (greater than 325 square metres); duplex dwelling: 836 square metres |
| Minimum lot width | Detached dwelling: 18 metres (floor area 325 square metres or less), 24 metres (greater than 325 square metres); duplex dwelling: 18 metres (375 square metres or less), 24 metres (greater than 375 square metres) |
| Maximum lot coverage | 35 percent |
| Maximum density | Detached dwelling: 465 square metres of gross floor area or floor space ratio of 0.35, whichever is lower; duplex dwelling: 511 square metres or floor space ratio of 0.45, whichever is lower |
| Maximum height | 7.6 metres |
| Front setback | 7.6 metres |
| Rear setback | 7.6 metres |
| Interior side setback | 3 metres (detached dwelling 325 square metres or less; duplex dwelling 375 square metres or less); 6 metres (larger dwellings) |
| Other rules |
|
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 12, item 3 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error