RT3 zone in Whistler: Two Family Residential Three
Provide a low density area for detached and duplex residential dwellings.
Zone rules
| Purpose | Provide a low density area for detached and duplex residential dwellings. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 695 square metres |
| Minimum lot width | 18 metres (frontage) |
| Maximum lot coverage | 35 percent |
| Maximum density | Detached dwelling: 325 square metres of gross floor area or floor space ratio of 0.35, whichever is lower; duplex dwelling: 375 square metres or floor space ratio of 0.45, whichever is lower |
| Maximum height | 7.6 metres |
| Front setback | 7.6 metres |
| Rear setback | 7.6 metres |
| Interior side setback | 3 metres |
| Other rules |
|
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 12, item 6 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error