I-1 zone in 100 Mile House: Light Industrial
Sites for manufacturing, processing, assembly, distribution, service and repair of industrial businesses, including supporting uses.
Zone rules
| Purpose | Sites for manufacturing, processing, assembly, distribution, service and repair of industrial businesses, including supporting uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 925 m² |
| Minimum lot width | 30 m |
| Maximum lot coverage | 60% of the parcel area (all buildings and structures) |
| Maximum density | Floor area ratio of 1.2 |
| Maximum height | 15.5 m (all buildings and structures) |
| Maximum height, accessory buildings | 15.5 m (all buildings and structures) |
| Front setback | 7.5 m |
| Rear setback | 6 m |
| Interior side setback | 3 m |
| Street side setback | 4.5 m |
| Accessory building setbacks | front 7.5 m, interior side and rear 1.5 m, exterior side 4.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 1466, 2026 (consolidated version including Bylaws No. 1470 and 1483), s. 12.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District's consolidation is "for convenience only"; it asks readers to refer to the original bylaws. CD-2 is shown in the bylaw as "Repealed" and is not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all 100 Mile House zones · Report an error