RS1 zone in Abbotsford: Urban Estate Residential Zone
Accommodate single detached dwellings on large urban lots.
Zone rules
| Purpose | Accommodate single detached dwellings on large urban lots. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,620 m² |
| Minimum lot width | 30.0 m |
| Maximum lot coverage | 33% |
| Maximum density | Floor Space Ratio 0.50 |
| Maximum height | Principal building: 9.5 m or three Storeys, whichever is less |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 6.0 m |
| Rear setback | 7.5 m |
| Interior side setback | 1.8 m |
| Street side setback | 4.5 m |
| Accessory building setbacks | Accessory building or structure: front 6.0 m, rear 1.0 m, interior side 1.0 m, exterior side 4.5 m; 1.5 m from the principal building |
Source: Abbotsford Zoning Bylaw, 2014 (Bylaw No. 2400-2014), City's online consolidation, s. 340 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City publishes the bylaw as one PDF per section or zone in its Civix bylaw library (laws.abbotsford.ca); each zone below has its own source_url and its pdf_page is the page within that file. The text is described in the bylaw as an unofficial consolidation for convenience; no consolidation date is stated. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Abbotsford zones · Report an error