RSMH zone in Abbotsford: Infill Manufactured Home Zone
Single detached dwellings and fee simple manufactured homes on urban lots.
Zone rules
| Purpose | Single detached dwellings and fee simple manufactured homes on urban lots. |
|---|---|
| Main uses | Single Detached Dwelling |
| Also allowed (secondary uses) |
|
| Minimum lot area | 495 m² (interior lot); 585 m² (corner lot); through and panhandle lots not permitted |
| Minimum lot width | 20.0 m (interior lot); 23.0 m (corner lot); through and panhandle lots not permitted |
| Maximum lot coverage | 40% |
| Maximum density | Floor space ratio 0.65, except 0.5 for a manufactured home |
| Maximum height | 11.0 m or three storeys, whichever is less; 6.0 m or one storey, whichever is less, for a manufactured home |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 6.0 m |
| Rear setback | 6.0 m; 1.5 m for a manufactured home |
| Interior side setback | 1.2 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | front 6.0 m, rear 1.0 m, interior side 1.0 m, exterior side 3.0 m; 1.5 m between dwelling and accessory building |
| Other rules |
|
Source: Abbotsford Zoning Bylaw, 2014 (Bylaw No. 2400-2014), City's online consolidation, s. 388 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City publishes the bylaw as one PDF per section or zone in its Civix bylaw library (laws.abbotsford.ca); each zone below has its own source_url and its pdf_page is the page within that file. The text is described in the bylaw as an unofficial consolidation for convenience; no consolidation date is stated. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Abbotsford zones · Report an error