R1 zone in Burns Lake: Residential Low Density
In short
Areas for low density residential housing.
Zone rules
| Purpose | Areas for low density residential housing. |
|---|---|
| Main uses | single detached dwellingExtra uses apply only on specific lots (see site-specific). |
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 464 m² |
| Minimum lot width | 15 m |
| Maximum lot coverage | 40% for all buildings and structures |
| Maximum density | 16 units per hectare; one principal dwelling per parcel |
| Maximum height | 11 m |
| Maximum height, accessory buildings | 5 m |
| Front setback | 6 m |
| Rear setback | 6 m |
| Interior side setback | 1.5 m |
| Street side setback | 5 m |
| Accessory building setbacks | front 6 m, interior side 1.5 m, exterior side 5 m, rear 1.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 880, 2008 (consolidated up to April 2026, Schedules 1, 2 and 3), s. 7.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the official bylaws and amendments adopted by Council prevail. R7 (s. 8.3) is in the bylaw text but not in its s. 5.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Burns Lake zones · Report an error