R5 zone in Burns Lake: Residential Medium Density
In short
Medium density multi-unit housing.
Zone rules
| Purpose | Medium density multi-unit housing. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,400 m² (apartment and congregate housing); 1,000 m² (rowhouse); 830 m² (duplex, triplex, fourplex and semi-detached) |
| Minimum lot width | 30 m (apartment, congregate housing and rowhouse, interior and corner lots); 22 m (duplex, fourplex and semi-detached interior lots); 24 m (duplex, fourplex and semi-detached corner lots) |
| Maximum lot coverage | 40% for all buildings; 50% for all buildings, driveways and parking areas |
| Maximum density | 30 dwelling units per hectare (35 where special needs housing is provided) |
| Maximum height | 11 m |
| Maximum height, accessory buildings | 5 m |
| Front setback | 6 m (7.5 m for apartments and congregate housing) |
| Rear setback | 6 m |
| Interior side setback | 2 m |
| Street side setback | 5 m |
| Accessory building setbacks | front 6 m, interior side 1.5 m, exterior side 5 m, rear 1.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 880, 2008 (consolidated up to April 2026, Schedules 1, 2 and 3), s. 8.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the official bylaws and amendments adopted by Council prevail. R7 (s. 8.3) is in the bylaw text but not in its s. 5.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Burns Lake zones · Report an error