R2 zone in Burns Lake: Residential Duplex
In short
Low density residential housing in the form of duplex and semi-detached dwellings.
Zone rules
| Purpose | Low density residential housing in the form of duplex and semi-detached dwellings. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 830 m² (duplex lot); 464 m² (one dwelling unit of a semi-detached lot); 464 m² (single detached dwelling lot) |
| Minimum lot width | 22 m (interior duplex lot); 24 m (corner duplex lot); 11 m (interior semi-detached unit lot); 12 m (corner semi-detached unit lot); 11 m (interior single detached lot); 12 m (corner single detached lot) |
| Maximum lot coverage | 45% for all buildings and structures |
| Maximum density | Up to two dwelling units per parcel |
| Maximum height | 11 m |
| Maximum height, accessory buildings | 5 m |
| Front setback | 6 m |
| Rear setback | 6 m |
| Interior side setback | 1.5 m (0 m between interior attached units) |
| Street side setback | 4.5 m |
| Accessory building setbacks | front 6 m, interior side 1.5 m, exterior side 4.5 m, rear 1.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 880, 2008 (consolidated up to April 2026, Schedules 1, 2 and 3), s. 7.2 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the official bylaws and amendments adopted by Council prevail. R7 (s. 8.3) is in the bylaw text but not in its s. 5.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Burns Lake zones · Report an error