R-1 zone in Cumberland: Infill Residential
Gentle densification of existing low-density neighbourhoods, with up to four dwelling units by renovation or small-scale multi-unit infill.
Zone rules
| Purpose | Gentle densification of existing low-density neighbourhoods, with up to four dwelling units by renovation or small-scale multi-unit infill. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 650 m² |
| Minimum lot width | 15.0 m |
| Maximum lot coverage | 50% (70% including impermeable surfaces) |
| Maximum density | 4 per lot |
| Maximum height | 11.0 m |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 3.0 m (1st-2nd storey and garage/carport); 4.5 m (3rd storey and above) |
| Rear setback | 4.5 m (1st-2nd storey); 6.0 m (3rd storey and above); 1.5 m where the rear lot line abuts a lane |
| Interior side setback | 1.5 m |
| Street side setback | 3.0 m (1st-2nd storey); 4.5 m (3rd storey and above) |
| Accessory building setbacks | front 3.0 m, rear 1.5 m, side 1.5 m, exterior side 4.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 1238, 2025 (consolidated July 27, 2026), s. 10.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; if there are discrepancies the amendment bylaws prevail. Zones are grouped by Part, so each zone's lines range covers its whole Part (shared tables). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Cumberland zones · Report an error