R-2 zone in Cumberland: West Dunsmuir Residential
Up to three dwelling units in existing residential areas where infrastructure constraints limit further densification.
Zone rules
| Purpose | Up to three dwelling units in existing residential areas where infrastructure constraints limit further densification. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 650 m² |
| Minimum lot width | 15.0 m |
| Maximum lot coverage | 40% (70% including impermeable surfaces) |
| Maximum density | 3 per lot |
| Maximum height | 10.0 m |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 3.0 m (1st-2nd storey and garage/carport)The minimum front setback is 0.0 m for the lots shown in Figure 10-2, and the maximum front setback for one dwelling unit is 2.0 m for those lots. |
| Rear setback | 4.5 m (1st-2nd storey); 1.5 m where the rear lot line abuts a lane |
| Interior side setback | 1.5 m |
| Street side setback | 3.0 m (1st-2nd storey) |
| Accessory building setbacks | front 3.0 m, rear 1.5 m, side 1.5 m, exterior side 4.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 1238, 2025 (consolidated July 27, 2026), s. 10.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; if there are discrepancies the amendment bylaws prevail. Zones are grouped by Part, so each zone's lines range covers its whole Part (shared tables). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Cumberland zones · Report an error