R-3 zone in Cumberland: Large Lot Residential
Low-density residential uses on larger lots, lots not on community water or sewer, or lots outside the Urban Containment Boundary.
Zone rules
| Purpose | Low-density residential uses on larger lots, lots not on community water or sewer, or lots outside the Urban Containment Boundary. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 2,024 m² |
| Minimum lot width | 25.0 m |
| Maximum lot coverage | 35% (50% including impermeable surfaces) |
| Maximum density | 2 per lot |
| Maximum height | 10.0 m |
| Maximum height, accessory buildings | 6.0 m |
| Front setback | 7.5 mThe 7.5 m figure sits in the R-3 column of the 3rd-storey row of the front setback table, with no separate values for 1st-2nd storey. |
| Rear setback | 4.5 m (1st-2nd storey) |
| Interior side setback | 1.5 m |
| Street side setback | 3.0 m (1st-2nd storey) |
| Accessory building setbacks | front 3.0 m, rear 1.5 m, side 1.5 m, exterior side 4.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 1238, 2025 (consolidated July 27, 2026), s. 10.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; if there are discrepancies the amendment bylaws prevail. Zones are grouped by Part, so each zone's lines range covers its whole Part (shared tables). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Cumberland zones · Report an error