I7 zone in Delta: High Impact Industrial Zone

Delta, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

High impact industrial uses.

Zone rules

Purpose	High impact industrial uses.
Main uses	Leather tanning Manufacturing limited to Portland cement, natural gas and petroleum products, asphalt, and fertilizer and chemical products (excluding radioactive materials)
Also allowed (secondary uses)	Any use customarily accessory to a principal use Security guard dwelling unit, accessory to a principal use Service or utility building or structure
Front setback	30 m
Rear setback	30 m
Interior side setback	30 m
Street side setback	30 m
Accessory building setbacks	front 7.5 m; interior side 4.5 m where a hard surfaced highway at least 9 m wide gives vehicle access to the rear of the lot, otherwise 7.5 m on one side; exterior side 4.5 m; rear 4.5 m, or 7.5 m if abutting a side lot line
Other rules	Manufacturing may not include burning new or used materials (other than natural gas) to dispose of them. Structures used to store materials related to principal uses must meet the setbacks of a principal structure.

Source: Delta Zoning Bylaw No. 7600, 2017 (consolidated for reference purposes to April 21, 2026, incorporating amendments up to Bylaw No. 8552), s. 16.70 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City's consolidation is for reference purposes only; refer to the City's online version for the current consolidation. Older site-specific "CD" zones (CD1 to CD495) are still regulated by the repealed Delta Zoning Bylaw No. 2750, 1977 and are not in this document; only the CDZ zones (CDZ1 onward) are written out here. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Delta zones · Report an error