CC1 zone in Langford: City Centre
High-density development that must include a residential component as the primary use within a building.
Zone rules
| Purpose | High-density development that must include a residential component as the primary use within a building. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | Apartment allowed on a lot under 1,400 m² or with frontage under 37 m: Lot 6, Section 5, Esquimalt District, Plan 7089 (2749 Jacklin Road) |
| Minimum lot area | 2,000 m² |
| Minimum lot width | A lot with frontage under 37 m, or area under 1,400 m², may only be used for townhouses |
| Maximum density | Floor area ratio 0.3; up to 5.0 on listed lands with payment, 100 m² or 5% of the lot as common outdoor amenity space, and 80% active building frontage |
| Maximum height | 6 storeys |
| Front setback | Two storeys or less: 2 m; three storeys or more: 4 m |
| Rear setback | 3 m |
| Interior side setback | 3 m |
| Street side setback | Two storeys or less: 2 m; three storeys or more: 4 m |
| Other rules |
|
Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.57 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Langford zones · Report an error