R1 zone in Langford: Residential Infill
Permit one- and two-family residential, townhouse, and small-scale multi-unit infill housing in areas served by community sewer.
Zone rules
| Purpose | Permit one- and two-family residential, townhouse, and small-scale multi-unit infill housing in areas served by community sewer. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 300 m² |
| Minimum lot width | 12 m |
| Maximum lot coverage | 50% |
| Maximum density | On lots of 280 m² or less up to 3 units; on lots over 281 m² up to 4 units; up to 6 units on lots within 400 m of a prescribed transit stop |
| Front setback | 3 m; garage or carport whose vehicle access crosses a front or exterior side lot line: 5.5 m |
| Rear setback | 3 m |
| Interior side setback | 1.5 m |
| Street side setback | 3 m; garage or carport whose vehicle access crosses an exterior side lot line: 5.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.21 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Langford zones · Report an error