RM2A zone in Langford: Attached Housing
Permit two-family and townhouse residential uses in areas serviced by community sanitary sewers.
Zone rules
| Purpose | Permit two-family and townhouse residential uses in areas serviced by community sanitary sewers. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,600 m² |
| Minimum lot width | 18 m |
| Maximum lot coverage | 45% |
| Maximum density | Floor area ratio 0.75; up to 1.5 on Schedule AD lands if the owner pays the amount set out there |
| Maximum height | Three storeys |
| Front setback | 5.5 m |
| Rear setback | 7.5 m from at least one interior side or rear lot line and 3 m from the other |
| Interior side setback | 7.5 m from at least one interior side or rear lot line and 3 m from the other |
| Street side setback | 5.5 m |
| Other rules | A townhouse building or two-family dwelling may not be wider than 50 m or six dwelling units, whichever is less |
Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.31A (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Langford zones · Report an error