RT1 zone in Langford: Residential Townhouse 1
Permit one-family and townhouse residential uses in areas serviced by community sanitary sewer.
Zone rules
| Purpose | Permit one-family and townhouse residential uses in areas serviced by community sanitary sewer. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 100 m² |
| Minimum lot width | 5 m |
| Maximum lot coverage | 60% |
| Maximum density | Floor area ratio 0.5; up to 1.2 on Schedule AD lands if the owner pays the amount set out there |
| Maximum height | 3 storeys |
| Front setback | 3 m; garage or carport whose vehicle access crosses the front lot line: 5.5 m |
| Rear setback | 5.5 m |
| Interior side setback | 1.2 m where the lot abuts any zone other than the RT1 Zone |
| Street side setback | 3.5 m; garage or carport whose vehicle access crosses the exterior side lot line: 5.5 m |
| Other rules | A one-family dwelling follows the R2 Zone regulations instead of this Zone |
Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.28 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Langford zones · Report an error