CTI1 zone in Whistler: Community and Transportation Infrastructure One
Industrial type uses supporting community and transportation infrastructure, and civic uses
Zone rules
| Purpose | Industrial type uses supporting community and transportation infrastructure, and civic uses |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 2000 square meters |
| Minimum lot width | 23 meters |
| Maximum lot coverage | 40 percent |
| Maximum density | Floor space ratio 0.5; total gross floor area in the zone 18,581 square metres, with a limit for each site (for example Lot B 6,410.3 square metres) |
| Maximum height | 12 meters |
| Front setback | 7.5 meters |
| Rear setback | 3.0 meters |
| Interior side setback | 3.0 meters (side setback) |
| Other rules |
|
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 10, item 16 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error