IS3 zone in Whistler: Industrial Service Three
In short
A utility storage and unloading site
Zone rules
| Purpose | A utility storage and unloading site |
|---|---|
| Main uses | Utility storage and unloading facility |
| Also allowed (secondary uses) | Auxiliary buildings and auxiliary uses |
| Minimum lot area | 1,000 square metres |
| Minimum lot width | 15 metres (parcels created by subdivision) |
| Maximum lot coverage | No regulations |
| Maximum density | Maximum gross floor area of all buildings on a parcel 50 square metres |
| Maximum height | 6 metres |
| Front setback | 7.5 metres |
| Rear setback | 1.5 metres |
| Interior side setback | 3 metres (side setback) |
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 10, item 5 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error