RM65 zone in Whistler: Residential Multiple Sixty-Five
Medium density employee housing residential development
Zone rules
| Purpose | Medium density employee housing residential development |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Auxiliary buildings and uses |
| Minimum lot area | Parcel 1: 3,846 m²; Parcel 2: 5,134 m² (either may be up to 10 percent less if the other is increased) |
| Maximum density | Gross floor area of all buildings: parcel 1: 2,400 m²; parcel 2: 3,200 m². Per dwelling unit up to 175 m² (apartment or townhouse) or 233 m² (duplex) |
| Maximum height | Apartments 18.0 m; Duplexes 8.2 m; Townhouses 10.7 m |
| Front setback | 6 m from any parcel line |
| Rear setback | 6 m from any parcel line |
| Interior side setback | 6 m from any parcel line (a duplex or townhouse may be built with a party wall at a side parcel line) |
| Street side setback | 6 m from any parcel line |
| Other rules |
|
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 13, item 66 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error