RM68 zone in Whistler: Residential Multiple Sixty- Eight
Low density, slope-responsive residential use
Zone rules
| Purpose | Low density, slope-responsive residential use |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Auxiliary buildings and auxiliary uses |
| Minimum lot area | 0.34 hectares |
| Minimum lot width | 85 m (frontage) |
| Maximum lot coverage | 20% |
| Maximum density | Floor space ratio 0.25; detached dwelling up to 465 m²; duplex dwelling up to 511 m² |
| Maximum height | 10.7 m (principal building) |
| Maximum height, accessory buildings | 5 m (auxiliary building) |
| Front setback | 7.6 m from any parcel boundary |
| Rear setback | 7.6 m from any parcel boundary |
| Interior side setback | 7.6 m from any parcel boundary |
| Street side setback | 7.6 m from any parcel boundary |
| Other rules |
|
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 13, item 69 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error