RM7 zone in Whistler: Residential Multiple Seven
High density multiple residential development.
Zone rules
| Purpose | High density multiple residential development. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Auxiliary buildings and auxiliary uses |
| Minimum lot area | 5,000 m² |
| Minimum lot width | 1/10th of parcel perimeter |
| Maximum lot coverage | 40% |
| Maximum density | Floor site ratio 1.10; maximum one dwelling unit per 50 m² of usable site area |
| Maximum height | 12 m (any building) |
| Front setback | 7.6 m from any parcel boundary |
| Rear setback | 7.6 m from any parcel boundary |
| Interior side setback | 7.6 m from any parcel boundary |
| Street side setback | 7.6 m from any parcel boundary |
| Other rules | Minimum 6 m between principal use buildings |
Source: Zoning and Parking Bylaw No. 303, 2015 (consolidation dated August 8, 2026), s. Part 13, item 7 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The consolidation is printed by authority of the Corporate Officer under section 139 of the Community Charter. Zones marked deleted in the bylaw (RM8, RM32, RR3, TP1 to TP3, CR3, CR5, CR6, LNP, LNL) are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Whistler zones · Report an error