GovHandbook

W1 zone in Langford: Special Wholesale

Langford, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Accommodate large-scale retail of commercial goods.

Zone rules

PurposeAccommodate large-scale retail of commercial goods.
Main uses
  • Financial institution
  • Gasoline service station
  • Special wholesale
  • Warehouse
Also allowed (secondary uses)
  • Accessory buildings and structures
  • Accessory office
  • Accessory retail store
  • One accessory dwelling unit
  • Uses accessory to a principal use permitted in this Zone
  • Uses permitted by Section 3.01 of this Bylaw
Minimum lot area2 ha (4.9 ac); 0.9 ha (2.3 ac) for Lot D as shown on Schedule “C”
Maximum lot coverage50%
Maximum height12 m (39.4 ft)
Front setback7.5 m (24.6 ft)
Rear setback7.5 m (24.6 ft), or a distance equal to the height of the building nearest the rear lot line, whichever is greater
Interior side setback3 m (9.8 ft) (any side lot line)
Street side setback3 m (9.8 ft) (any side lot line)
Other rules
  • Accessory offices may not exceed 20% of the gross floor area of the building; accessory retail stores may not exceed 30%.
  • A landscaped area at least 5 m (16.4 ft) wide with a solid fence at least 1.8 m (5.9 ft) high is required next to residentially designated lands.

Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.61 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Langford zones · Report an error