RG zone in Maple Ridge: Cluster Housing Residential
Low density urban strata development with groups, rows or clusters of single detached dwellings, or blocks of three or more attached units.
Zone rules
| Purpose | Low density urban strata development with groups, rows or clusters of single detached dwellings, or blocks of three or more attached units. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 0.8 hectares |
| Minimum lot width | 60.0 metres |
| Maximum lot coverage | 35% |
| Maximum density | 15 units per net hectare |
| Maximum height | 9.5 metres |
| Maximum height, accessory buildings | 4.5 metres |
| Front setback | 7.5 metres |
| Rear setback | 9.0 metres |
| Interior side setback | 4.5 metres |
| Street side setback | 7.5 metres |
| Other rules | No other requirements |
Source: Maple Ridge Zoning Bylaw No. 7600-2019 (consolidated to July 28, 2026), s. 624 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated PDF with a list of amending bylaws at the end. Residential sections 601 to 604 and 615 are deleted by Bylaw 8104-2026; CD sections 1037, 1038, 1043, 1044 and 1046 to 1049 are held for future zones (no text). Zone section numbers are the bylaw's 3 to 4 digit section numbers. The City's map still carries old Bylaw 3510 zones (R-1, R-2, R-3, R-4, RT-1) on some lots, which are not part of Bylaw 7600. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Maple Ridge zones · Report an error