RM-1 zone in Maple Ridge: Low Density Townhouse Residential
Low density townhouse residential where two or more townhouse dwelling units are attached.
Zone rules
| Purpose | Low density townhouse residential where two or more townhouse dwelling units are attached. |
|---|---|
| Main uses | Townhouse Residential |
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 1,000.0 m² |
| Minimum lot width | 27.0 metres |
| Maximum lot coverage | No lot coverage requirement |
| Maximum density | Floor Space Ratio of 0.6 times the lot area (higher on four listed lots: 0.64, 0.66, 0.63, 0.63) |
| Maximum height | 9.5 metres (townhouse); 11.0 metres for apartment use under the Albion Area density bonus option |
| Maximum height, accessory buildings | 4.5 metres; 9.5 metres for an indoor amenity area building |
| Front setback | 5.0 metres inside the Town Centre Area; 6.0 metres outside it; 7.5 metres under the Albion Area density bonus option |
| Rear setback | 7.5 metres |
| Interior side setback | 6.0 metres inside the Town Centre Area; 7.5 metres outside it |
| Street side setback | 7.5 metres |
| Other rules |
|
Source: Maple Ridge Zoning Bylaw No. 7600-2019 (consolidated to July 28, 2026), s. 617 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated PDF with a list of amending bylaws at the end. Residential sections 601 to 604 and 615 are deleted by Bylaw 8104-2026; CD sections 1037, 1038, 1043, 1044 and 1046 to 1049 are held for future zones (no text). Zone section numbers are the bylaw's 3 to 4 digit section numbers. The City's map still carries old Bylaw 3510 zones (R-1, R-2, R-3, R-4, RT-1) on some lots, which are not part of Bylaw 7600. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Maple Ridge zones · Report an error