RM-6 zone in Maple Ridge: Town Centre High Density Apartment Residential
High density apartment residential in the Town Centre Area, with a minimum building height of ten storeys.
Zone rules
| Purpose | High density apartment residential in the Town Centre Area, with a minimum building height of ten storeys. |
|---|---|
| Main uses | Apartment Residential |
| Also allowed (secondary uses) |
|
| Minimum lot area | 2,000.0 m² |
| Minimum lot width | 30.0 metres |
| Maximum lot coverage | No lot coverage requirement |
| Maximum density | Floor Space Ratio of 1.6 times the lot area, with at least 10 storeys; up to 4.0 with bonuses |
| Maximum height | 73.0 metres; at least 37.0 metres and ten storeys |
| Maximum height, accessory buildings | 4.5 metres |
| Front setback | 4.5 metres |
| Rear setback | 7.5 metres |
| Interior side setback | 7.5 metres |
| Street side setback | 4.5 metres |
| Other rules |
|
Source: Maple Ridge Zoning Bylaw No. 7600-2019 (consolidated to July 28, 2026), s. 622 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated PDF with a list of amending bylaws at the end. Residential sections 601 to 604 and 615 are deleted by Bylaw 8104-2026; CD sections 1037, 1038, 1043, 1044 and 1046 to 1049 are held for future zones (no text). Zone section numbers are the bylaw's 3 to 4 digit section numbers. The City's map still carries old Bylaw 3510 zones (R-1, R-2, R-3, R-4, RT-1) on some lots, which are not part of Bylaw 7600. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Maple Ridge zones · Report an error