RS-1c zone in Maple Ridge: Single Detached (Low Density) Residential
Low density single detached and two-unit (duplex) residential on lots of at least 1,200 m².
Zone rules
| Purpose | Low density single detached and two-unit (duplex) residential on lots of at least 1,200 m². |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,200.0 m² |
| Minimum lot width | 24.0 metres |
| Maximum lot coverage | 25% (single detached); 35% (two-unit duplex), all principal and accessory buildings together |
| Maximum density | No density limit stated |
| Maximum height | 9.5 metres |
| Maximum height, accessory buildings | 4.5 metres |
| Front setback | 9.0 metres |
| Rear setback | 9.0 metres |
| Interior side setback | 2.5 metres |
| Street side setback | 9.0 metres |
| Accessory building setbacks | front 9.0 m, rear 1.5 m, interior side 1.5 m, exterior side 3.0 m |
| Other rules | The two duplex units must share a common roof and either share a wall for at least 15% of the structure's perimeter or be one above the other |
Source: Maple Ridge Zoning Bylaw No. 7600-2019 (consolidated to July 28, 2026), s. 608 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated PDF with a list of amending bylaws at the end. Residential sections 601 to 604 and 615 are deleted by Bylaw 8104-2026; CD sections 1037, 1038, 1043, 1044 and 1046 to 1049 are held for future zones (no text). Zone section numbers are the bylaw's 3 to 4 digit section numbers. The City's map still carries old Bylaw 3510 zones (R-1, R-2, R-3, R-4, RT-1) on some lots, which are not part of Bylaw 7600. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Maple Ridge zones · Report an error