RST zone in Maple Ridge: Street Townhouse Residential
Attached street townhouses on individual fee simple lots designated Eco-Cluster in the Silver Valley Area Plan.
Zone rules
| Purpose | Attached street townhouses on individual fee simple lots designated Eco-Cluster in the Silver Valley Area Plan. |
|---|---|
| Main uses | Street Townhouse Residential (maximum four units attached) |
| Also allowed (secondary uses) |
|
| Minimum lot area | End unit lot 234.0 m²; exterior end unit lot 273.0 m²; interior unit lot 195.0 m² |
| Minimum lot width | End unit lot 9.0 m; exterior end unit lot 10.5 m; interior unit lot 7.5 m |
| Maximum lot coverage | 55% (end unit lot); 45% (exterior end unit lot); 65% (interior unit lot); accessory buildings 3% of the lot within those totals |
| Maximum density | Dwelling unit floor area of at most 223.0 m², not counting basement and garage |
| Maximum height | 9.5 metres |
| Maximum height, accessory buildings | 4.5 metres |
| Front setback | 4.0 metres; the garage must be set back 5.5 metres or recessed at least 0.6 metres from the building face, whichever is less |
| Rear setback | 14.0 metres (lot with lane access); 8.0 metres (lot without lane access), or 6.0 metres where the rear lot line abuts a greenbelt dedicated as conservation or park |
| Interior side setback | 1.5 metres; 0.0 metres where the interior side wall is attached to the neighbouring building's wall |
| Street side setback | 3.0 metres |
| Accessory building setbacks | rear 0.5 m (1.5 m for a garage), interior side 1.5 m (0.0 m where garages are attached), exterior side 3.0 m |
| Other rules |
|
Source: Maple Ridge Zoning Bylaw No. 7600-2019 (consolidated to July 28, 2026), s. 612 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated PDF with a list of amending bylaws at the end. Residential sections 601 to 604 and 615 are deleted by Bylaw 8104-2026; CD sections 1037, 1038, 1043, 1044 and 1046 to 1049 are held for future zones (no text). Zone section numbers are the bylaw's 3 to 4 digit section numbers. The City's map still carries old Bylaw 3510 zones (R-1, R-2, R-3, R-4, RT-1) on some lots, which are not part of Bylaw 7600. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Maple Ridge zones · Report an error