RM6 zone in Prince George: Mid-rise Residential

Prince George, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Provide for mid-rise multiple housing with a maximum density of 140 dwellings/ha for areas defined by the OCP as suitable for higher density housing.

Zone rules

Purpose	Provide for mid-rise multiple housing with a maximum density of 140 dwellings/ha for areas defined by the OCP as suitable for higher density housing.
Main uses	Apartment hotel community care facility, major community care facility, minor housing, apartment housing, congregate housing, four-plex housing, row housing, stacked row religious assembly (only on sites less than 1.0 ha)
Also allowed (secondary uses)	club health service, minor home business 1 retail, convenience secondary suite service, massage therapy service, personal
Extra uses on specific lots	Broadcasting Studio and Exhibition & Convention Facility only on Lot 2, District Lot 1429, Cariboo District, Plan EPP72370
Minimum lot area	1,500 m²
Minimum lot width	27.0 m
Maximum lot coverage	45% (an additional 30% may be used for covered or enclosed off-street parking)
Maximum density	140 dwellings/ha
Maximum height	30.0 m
Maximum height, accessory buildings	5.0 m
Front setback	4.5 m
Rear setback	4.5 m
Interior side setback	3.0 m (not required for a common wall for attached housing)
Street side setback	3.0 m
Accessory building setbacks	front 15.0 m, interior side 1.2 m, exterior side 3.0 m, rear 1.2 m
Other rules	Minimum distance between principal buildings is 6.0 m Service, retail, and health service uses must be in a building that also has a residential use; each tenancy is limited to 150 m², and all such uses combined to the lesser of 260 m² or 10% of the gross floor area of all principal buildings

Source: Zoning Bylaw No. 7850, 2007 (consolidated version, revised October 5, 2026), s. 10.14 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this version is consolidated for convenience. Zone sections that share a heading cover variant codes (AR3m, RS1m, RS2m, RM9r, C1c/C1l, C2c, C4c/C4l/C4lc, C6c/C6l/C6lc, M1n, M2n, M3n, M5n). Sections 10.5 (deleted), 15.13 (Z13 not in the bylaw) and 15.18 (Z18, deleted by Bylaw 9466) are not zones. Schedule A, the zoning map, is the zoning layer in PGMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Prince George zones · Report an error