RT3 zone in Prince George: Residential Cluster
Provide for comprehensively planned clusters of single detached and semi-detached housing, in a bare land strata format with urban services.
Zone rules
| Purpose | Provide for comprehensively planned clusters of single detached and semi-detached housing, in a bare land strata format with urban services. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 0.2 ha |
| Minimum lot width | 35.0 m |
| Maximum lot coverage | 45% |
| Maximum density | 25 units/ha |
| Maximum height | 10.0 m; 2.5 storeys maximum |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 6.0 m (front, side and rear) |
| Rear setback | 6.0 m (front, side and rear) |
| Interior side setback | 6.0 m (front, side and rear) |
| Accessory building setbacks | front 6.0 m, interior side 1.2 m, exterior side 3.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 7850, 2007 (consolidated version, revised October 5, 2026), s. 10.8 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this version is consolidated for convenience. Zone sections that share a heading cover variant codes (AR3m, RS1m, RS2m, RM9r, C1c/C1l, C2c, C4c/C4l/C4lc, C6c/C6l/C6lc, M1n, M2n, M3n, M5n). Sections 10.5 (deleted), 15.13 (Z13 not in the bylaw) and 15.18 (Z18, deleted by Bylaw 9466) are not zones. Schedule A, the zoning map, is the zoning layer in PGMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Prince George zones · Report an error