RM7 zone in Prince George: High-rise Residential
Provide for high-rise multiple housing with a maximum density of 280 dwellings/ha for areas defined by the OCP as suitable for higher density housing.
Zone rules
| Purpose | Provide for high-rise multiple housing with a maximum density of 280 dwellings/ha for areas defined by the OCP as suitable for higher density housing. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | housing, supportive only on Parcel A (W19288), Parcel C (Plan B7858), Lot 19 and Lot 20, Block 257, District Lot 343, Cariboo District, Plan 1268 |
| Minimum lot area | 1,800 m² |
| Minimum lot width | 30.0 m |
| Maximum lot coverage | 55% (an additional 30% may be used for covered or enclosed off-street parking) |
| Maximum density | 280 dwellings/ha |
| Maximum height | 55.0 m |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 4.5 m |
| Rear setback | 4.5 m |
| Interior side setback | 3.0 m (not required for a common wall for attached housing) |
| Street side setback | 3.0 m |
| Accessory building setbacks | front 15.0 m, interior side 1.2 m, exterior side 3.0 m, rear 1.2 m |
| Other rules |
|
Source: Zoning Bylaw No. 7850, 2007 (consolidated version, revised October 5, 2026), s. 10.15 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this version is consolidated for convenience. Zone sections that share a heading cover variant codes (AR3m, RS1m, RS2m, RM9r, C1c/C1l, C2c, C4c/C4l/C4lc, C6c/C6l/C6lc, M1n, M2n, M3n, M5n). Sections 10.5 (deleted), 15.13 (Z13 not in the bylaw) and 15.18 (Z18, deleted by Bylaw 9466) are not zones. Schedule A, the zoning map, is the zoning layer in PGMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Prince George zones · Report an error