RS2 zone in Prince George: Single Residential

Prince George, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Foster an urban lifestyle on properties larger than 500 m², with compatible residential-related uses; areas designated RS2m provide for manufactured housing.

Zone rules

Purpose	Foster an urban lifestyle on properties larger than 500 m², with compatible residential-related uses; areas designated RS2m provide for manufactured housing.
Main uses	community care facility, minor housing, apartment housing, four-plex housing, manufactured (only in RS2m) housing, row housing, single detached housing, stacked row housing, two-unit
Also allowed (secondary uses)	bed & breakfast home business 1 home business 2 home business 3 (only in HBO) secondary dwelling secondary suite
Minimum lot area	500 m²
Minimum lot width	15.0 m
Maximum lot coverage	40%
Maximum density	3 dwelling units on a parcel 280 m² or less; 4 dwelling units on a parcel greater than 280 m² (where Small-Scale Multi-Unit Housing densities are exempt by Section 5.18: one principal dwelling and one secondary suite or dwelling)
Maximum height	11.0 m; 3 storeys maximum
Maximum height, accessory buildings	7.0 m (secondary dwellings 8.0 m)
Front setback	4.5 m
Rear setback	6.0 m
Interior side setback	1.2 m; where there is no direct vehicular access from a highway or lane to the rear yard or to a garage or carport, one side yard must be at least 4.5 m
Street side setback	3.0 m
Accessory building setbacks	front 4.5 m, interior side 1.2 m, exterior side 3.0 m, rear 1.2 m
Other rules	Maximum lot area 0.2 ha Accessory buildings: 90 m² total ground floor area Secondary dwellings: maximum ground floor area 100.0 m², interior side and rear yards 1.5 m

Source: Zoning Bylaw No. 7850, 2007 (consolidated version, revised October 5, 2026), s. 10.2 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this version is consolidated for convenience. Zone sections that share a heading cover variant codes (AR3m, RS1m, RS2m, RM9r, C1c/C1l, C2c, C4c/C4l/C4lc, C6c/C6l/C6lc, M1n, M2n, M3n, M5n). Sections 10.5 (deleted), 15.13 (Z13 not in the bylaw) and 15.18 (Z18, deleted by Bylaw 9466) are not zones. Schedule A, the zoning map, is the zoning layer in PGMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Prince George zones · Report an error