GovHandbook

RT1 zone in Prince George: Two-Unit Residential

Prince George, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Provide for housing, primarily in buildings with two dwellings.

Zone rules

PurposeProvide for housing, primarily in buildings with two dwellings.
Main uses
  • community care facility, minor
  • housing, apartment
  • housing, four-plex
  • housing, row
  • housing, single detached
  • housing, stacked row
  • housing, two-unit
Also allowed (secondary uses)
  • bed & breakfast
  • home business 1
  • home business 2
  • secondary dwelling
  • secondary suite
Minimum lot area650 m² (500 m² for single detached housing; 325 m² for a single unit of attached side-by-side two-unit housing)
Minimum lot width17.0 m (15.0 m for single detached housing; 8.5 m for a single unit of attached side-by-side two-unit housing); maximum lot width 12.0 m
Maximum lot coverage40%
Maximum density3 dwelling units on a parcel 280 m² or less; 4 dwelling units on a parcel greater than 280 m² (where Small-Scale Multi-Unit Housing densities are exempt by Section 5.18: one principal dwelling and one secondary suite or dwelling)
Maximum height11.0 m; 3 storeys maximum
Maximum height, accessory buildings7.0 m (secondary dwellings 8.0 m)
Front setback4.5 m
Rear setback6.0 m
Interior side setback1.2 m (not required for a common wall for attached side-by-side units of two-unit housing); where there is no direct vehicular access from a highway or lane to the rear yard or to a garage or carport, one side yard must be at least 4.5 m
Street side setback3.0 m
Accessory building setbacksfront 4.5 m, interior side 1.2 m, exterior side 3.0 m, rear 1.2 m
Other rules
  • Maximum lot area 0.4 ha
  • Accessory buildings: 90.0 m² total ground floor area
  • Secondary dwellings: maximum ground floor area 100.0 m², interior side yard 1.5 m, rear yard 1.2 m

Source: Zoning Bylaw No. 7850, 2007 (consolidated version, revised October 5, 2026), s. 10.6 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this version is consolidated for convenience. Zone sections that share a heading cover variant codes (AR3m, RS1m, RS2m, RM9r, C1c/C1l, C2c, C4c/C4l/C4lc, C6c/C6l/C6lc, M1n, M2n, M3n, M5n). Sections 10.5 (deleted), 15.13 (Z13 not in the bylaw) and 15.18 (Z18, deleted by Bylaw 9466) are not zones. Schedule A, the zoning map, is the zoning layer in PGMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Prince George zones · Report an error